Your concrete patio is a great place to relax and have fun, and it is a wonderful addition to your outdoor areas. Nonetheless, it is a fact that Oklahoma weather is harsh enough that it could damage certain surfaces. In fact, it is possible that rain, sun, and harsh weather conditions could cause concrete patio stains and cracks. This is where concrete sealing is a necessity, and we will walk you through how to seal concrete patio as concrete contractors in Oklahoma. 

If you’re considering your options, you’ve likely wondered about the concrete patio cost in Oklahoma City and how best to protect your investment. Allow Bill’s Custom Concrete to take you through. Whether you do this yourself or rely on our friendly team, this is the process to follow. 

Preparation of Patio Surface

A clean surface is a key to a successful sealing job. Before you ever get a chance to open your container of sealing material, your concrete needs to be clean and free of all kinds of dirt, debris, and stains. This debris will get between your concrete surface and your sealing material.

First, you will have to sweep your entire patio to get rid of any loose leaves or debris that is present. You will have to scrub your patio clean with a brush and concrete cleaner. Pressure washing is also a good alternative if you’re trying to get rid of a stain or residue that’s been deemed stubborn. Once you have scrubbed your concrete clean, you will have to wash it off well with a hose so that it is allowed to completely dry. This will take a full 24 hours or more, depending upon conditions.

Applying the Concrete Sealant

Once you have your patio clean and dried, it is now ready to be sealed. If you’re asking, how do you seal a concrete patio? The process isn’t complicated, but attention to detail is key. In order not to strain your back, you will need a roller with an extension handle. You will also need a small amount of your sealing material in a paint tray.

Start in one corner of your patio and work your way across in smaller areas that you can handle. Apply a thin layer of material and make sure that you’re not pooling your material. By overlapping your strokes, you will be able to prevent lines from forming and make sure that your whole area is coated. Another coat is recommended after a first coat of material is applied.

Letting It Dry & Cure

After you have applied a layer of sealing compound, it’s wait and see. This sealing compound has to be allowed to dry before a protective barrier is created. This is a crucial stage, as you shouldn’t use your patio for at least 24 to 48 hours after you have sealed it.

This whole procedure of curing may take a few days depending upon the type of sealants as well as weather conditions. In this procedure, it will also prove to be quite helpful to ensure that it is not exposed to any kind of moisture. Checking weather conditions before you start with this particular job will ensure that you have a clear date without rain for a couple of days.

When to Call the Professionals

Even though it is possible to seal a concrete patio without involving an expert, most property owners benefit from consulting with one. You have a concrete patio that is damaged or stained, or you’ve decided to do it by yourself, you should get in contact with us. We have been concrete contractors in Oklahoma City for many years, and we have everything that is needed to prepare and complete your concrete patio sealing project.

Protect Your Patio Investment

Sealing your concrete patio is one of the easiest and most effective ways of ensuring it is protected against natural elements while being in its absolute best condition. By understanding and following all of the preparation, application, and curing methods that are explained throughout this article, you will be well on your way to a finish that is nothing short of professional. Having a well-taken-care-of patio will do wonders for your curb appeal as well as your enjoyment of it with your family.